When One Is In Search Of Best Company That Do Powder Coating Hickory NC Deserves Priority Consideration

When in need of perfectly done powder coating Hickory NC is the right place to check out first. Powder coating refers to the process of covering a surface or object with free-flowing dry powder. This method has been proven to be superior and better than conventional liquid powders because of the many advantages that come with it. One of the major differences between the two kinds of paints is that conventional liquid paint requires a solvent while dry powder do not.

When painting an object or surface by using this method, there are three basic steps that need to be followed in the very sequence they come. The first step involves preparing the surface to be painted before the actual application of the paint. The second step is painting and then the curing process comes in the third place.

Before even commencing the preparation of surfaces to be painted, one must consider materials the surfaces are made of. Materials should dictate the kind of powder to be used to do the finishing. Coating process is carried our using two forms of polymers, thermoplastic and thermoset. The two polymers are made to bond with a variety of metal types to give best results. Coats that do well on cars may not do that well on small home decorations.

The coat sprayed on an object sticks on every surface of the object. This means that it might seal off bolts and nuts, clamps, bearings and any other surfaces that might need to be opened later on. There is therefore need for thorough cleaning of the surface before application of paint. Foreign materials, mill, rust scale, and dirt must be removed using appropriate cleaning methods.

Hard metals like steel and cast iron could be cleaned using bead or abrasive blasting. Light sanding, oil, paint, grease, and other chemicals may be removed from a surface using chemical solvent cleaning process. Chemical solvent cleaning must be used for completing the preparation process. Smooth or soft alloy metals like magnesium and aluminium may be removed by use of solvent cleaning, wire brushing, and sanding. Sand paper could also be applied on some other forms of contaminants.

The actual coating activity is performed using compressed air sprayers or guns. The gun or compressed air electrostatically charges the dry powder to make it adhere onto the surface being painted. The surface is usually grounded for the bonding to happen. Guns appear in different makes and can be acquired from any shop for as little as one hundred US Dollars.

Curing must be performed depending on the metal type under consideration. If the article is adequately small, traditional kitchen ovens can work just nicely otherwise a infrared heat lantern or other flameless sources of heat could be employed. Application of dry coats on already heated or warmed substrates is also an alternative that most painters are settling for currently. Curing should take approximately 10 to 15 minutes.

When in need of well done powder coating Hickory NC presents a nice place to check out. There are many companies that provide the service at very reasonable costs. They can be contacted for their services at any time. The internet can provide some contacts to call.