Identifying A Good Automotive Spray Booth

By Deborah Davis


Using spray booths has very important reasons behind it. These cubicles where cars and painters are locked inside can produce very attractive paint jobs. Many painters like working in a good automotive spray booth that gives them plenty of room to produce a perfect work. The reason for using a painting cubicle can vary from different body shops.

The painting job that is done on your car should meet the standards that you expect. To ensure that the perfect job is done, and customer expectations are met, it is recommended that the painting ought to be done in a controlled environment which will meet the environmental regulations. The following are some of the requirements for a good painting booth.

Although any automobile body shop will always have dust, a good painting booth should have less dust. The technicians should make sure that the dust is wiped off from the surface of cars, and proper coating of paint is used to reduce the accumulation of dust. For prevention of dust from a cubicle the following can be done; ensure that only authorized personnel access the cubicle, the cubicle is under appropriate pressure, it is constantly clean, and no debris inside and the doors are sealed, and the floor is concrete.

It has proper lighting. The painters should be accurate when doing their job. Painting lies in details. The painters should be able to spot any fault on the painted car and correct immediately; the missed spots should also be easy to see and correct. Without proper lighting inside the cubicle, the painters will strain while doing their jobs which is not recommended and will negatively affect the final painting outcome.

Cubicles should need to be well equipped with ventilation equipment that will prevent over-spray. Downdraft system should be installed. The system will help prevent over-spray when the required techniques are applied by the painters. Good ventilation in a painting cubicle saves on paint and other products that are used when painting. Paint that might spread on unwanted areas can easily be pulled away hence avoids over spaying and saves on paint.

Any cubicle that prevents harmful fumes from escaping to the environment is good. A good cubicle should be able to contain the fumes within. The paints used usually produce fumes that are harmful to human beings. Reducing the fumes emitted to the environment is very important and is required by the law. Body shops always try to use paints with low fumes that are emitted to the environment. The fumes should be directed away from where people work and away from the surrounding buildings.

The cubicle should be safer for the easy working of the employees. The tools that the painters use should not cause harm to any painter. The emissions from the solvents in the tools should be taken out after use. Safety equipment should be well placed inside the cubicle. They should be operational in case an emergency occurs; they can easily be used to save people and property.

Cubicles are very important in any body shops. They ensure that the environment that the car is painted in meets the set standards and also complies with the various regulations that are set by the various municipalities that govern areas that body shops are located. It is a good idea to use body shops that follow the set laws to be on the good side of the law. Consider only shops with booths.




About the Author:



. Bookmark the permalink.

Leave a Reply

Powered by Blogger.