Important Information On The Filter Press

When you hear the words filter media, large companies or manufacturing plants come into mind. Generally, filtration is the process by which water and solid waste such as rocks are separated. A marble-making company is one of the places where filter press are utilized. The water is recycled after filtration and used later on at the marble cutting stage.

The structure of the strainer is not as complicated as one may think. The main machinery is the plates that are covered with filtration material. This filtration material tends to create a seal between the two plates. To avoid blockage inside the seal, the pump applies just enough pressure. The filtrated liquid goes through the filtration cloth and through the openings of the filtration media.

You may be wondering, how does the machine rid itself of the residue that has been separated from the filtrate. Letting it occupy space for a long time could lead to its blocking or breaking down. The first step is to stop the feeding pump from supplying the slurry. From there, the pressure holding the seal in place is released. Afterwards, the force of gravity is supposed to pull at the material until it drops.

It is not uncommon to assume that the sifter might move in the process of dewatering. Some even presume that the plates get some sort of pressing in order to efficiently remove the water from the solid material. This, however, is nothing but a misconception. The sifter usually only moves to release the dried-up material and to close for another cycle.

Unlike other technologies, there is simplicity in operating these filters. They have the capacity to select cycle times, cake wideness, a pressure of the feed pump and plate flair that allow achievement of the most dried cakes. This makes them practically automated and they would be the best in terms of managing time.

Like every other machinery, strainer media to need maintenance. With the overhead beam design, sifter media do hang from overhead ray just as the name suggests. It is important for the strainer media to be just the right size depending on what kind of work they are subjected to. You may have a small strainer that carries out many batches or a large one that carries out fewer batches but at the end of the day, the output is the same.

The overhead beam is one of the types of sifter media available in the market. As the name suggests, the sifter plates hang from overhead ray. It so happens that there are no parts to the sides of the strainer, therefore, making it easier to maintain. For example, you do not have to remove the plates while changing the strainer cloths.

All in all, it is important that the press is taken care of as often as possible to avoid any irreversible damage. For example, the strainer cloth can be looked for rips at least once per cycle to avoid the unwanted material from passing through to the filtrated liquid.it should also be washed as often as needed and checked on cleanliness to avoid material settling between the cloth and the plates.